Air Filter Installation Arrow Ceiling

For maximum effectiveness, we recommend you change your filter at least once every three months.

Air filter installation arrow ceiling. Follow the direction of the arrow as show on the air filter, the air filter is install between the returned duct before your unit with the arrow on the air filter pointing toward the unit supply inlet. Before changing a home air filter in your hvac unit, turn off the unit to prevent injury to yourself or damage to the machine. Then replace it with a new one that is sized to fit the opening, being sure to orient it so the airflow arrow is pointing in toward the ductwork.

Today we’re going to talk about why it’s important for a furnace filter to face in the right direction and how to ensure you install yours the. A simpler way to figure this out is to always make the arrows face the ceiling or wall. Your air filter might also be housed inside the unit.

First check again as nearly all filters do have it, likely in the corner of one of the sides. A 20x25x1 filter is actually 20 inches high by 25 inches wide and 1 inch thick. This is not only a waste of energy, but it can also possibly damage your air conditioner or heating system.

Find your air filter location. If your filter is on the wall, the arrow should face the wall. If this is the case, you may have to remove an access panel to get to the filter.

You may want to change the filter more frequently if: Which way should the arrow be pointing in when i install my honeywell air filter in the air cleaner cabinet. Next, you’ll need to find the filter.

This is referred to as the supply side. Before changing the air filter, get the correct size. Often, the air filter is at the bottom.